Mazda RX-8 Wiper Blade Size for Driver & Passenger Side

Do you believe that improper Mazda RX-8 windshield wipers size will ruin your driving? If they are too small, the glass would be still dirty and if they are too big, then they will hit the side of your car and leave marks as well.

In case you agree with us, you must probably wonder how to identify the correct Mazda RX-8 windshield wipers size and don`t waste a lot of time. Well, we have a top solution with the charts of befitting sizes! There is nothing difficult about it: just look through the lists of cars, find your model and check what windshield wipers size we recommend for the Mazda RX-8. Easy as pie!


Custom-fit Add-ons

Wipers for Mazda RX-8 years

  • 2011 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2010 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2009 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2008 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2007 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2006 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2005 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)
  • 2004 Mazda RX-8

    • Driver - 20 inch
    • Passenger - 18 inch
    • Attach - Hook (9x3)

How to change your Mazda RX-8 wipers

Windshield wipers are a crucial safety feature in your Mazda RX-8 that help keep your windshield clear during rain, snow, and other harsh weather conditions. Over time, the rubber blades of the wipers can become worn or damaged, which can compromise their effectiveness and reduce visibility while driving. This can pose a serious safety risk for you and your passengers, as you may not be able to see clearly in inclement weather or other hazardous driving conditions. It is therefore important to replace your Mazda RX-8 wipers periodically to ensure they are working properly and providing maximum visibility on the road.

There is nothing complicated about replacing the wipers on your car with your own hands - it takes no more than 5 minutes. Follow these instructions:

  • Purchase a new set of wiper blades that are compatible with your Mazda RX-8.
  • Lift the wiper arm away from the windshield and locate the small tab where the blade connects to the arm.
  • Press the tab to release the old wiper blade from the arm.
  • Take the new wiper blade and line it up with the arm, making sure that it is facing the correct direction.
  • Insert the new blade into the slot where the old one was removed, and listen for it to click into place.
  • Gently lower the wiper arm back down onto the windshield.
  • Repeat this process for the other wiper blade, if necessary.
  • Test the new wipers to make sure they are working properly by turning them on and observing their movement across the windshield.

In addition, when replacing the wipers, be sure to look at the level of washer fluid in a special tank. Make sure it does not run out, and if necessary, top up to the correct level. If you need to clean the windshield urgently - it will be extremely necessary. Choose your windshield washer according to the conditions of your climate.

Windshield washer



Mazda RX-8 specs
Compare

Performance

Engine
0-60 times
Horsepower

Exterior

Wheels
Wheel Interchange
Bulbs
Dimensions
Weight

Interior

Steering wheel
Speakers size

Maintenance

Towing Capacity
Oil Capacity
Wipers size
Fuses
Gas tank size
Battery size
Safety ratings
Complaints
Manuals
Mpg

Forgive our ad-diction! It's just our funky little way of keeping the lights on. Bear with us!

Discussion